Metallica Black Album tone

Discussion in 'ToneLib-GFX presets' started by Tony the Metalhead, Oct 30, 2021.

  1. Tony the Metalhead

    Tony the Metalhead Active Member

    Metallica Black Album tone

    Preset name: Enter night

    Comments:
    updated

    Effects chain:
    [​IMG]


    Effect: "Noise Reducer" (Dynamics / Filter), active - "yes"
    {
    "Sens" = 75
    "Mode" = Hard
    }

    Effect: "T-Scream" (Overdrive / Distortion), active - "yes"
    {
    "Drive" = 50
    "Tone" = 50
    "Level" = 20
    }

    Effect: "Splitter" (Dynamics / Filter)
    {
    "A-Bypass" = Off
    "A-Pan" = 0
    "A-Level" = 55
    "B-Bypass" = Off
    "B-Pan" = 0
    "B-Level" = 55

    'A' branch:
    {

    Effect: "Metal DS" (Overdrive / Distortion), active - "yes"
    {
    "Dist" = 85
    "Bass" = 65
    "Middle" = 25
    "Treble" = 85
    "Level" = 25
    }

    Effect: "Slo 100" (Amp simulators), active - "yes"
    {
    "Gain" = 50
    "Bass" = 55
    "Middle" = 25
    "Treble" = 55
    "Presence" = 55
    "Master" = 50
    "Level (dB)" = -6
    }

    Effect: "IR Processor" (Cabinets), active - "yes"
    {
    "IR" = BlackAlbum SoloLeadOD_dc
    "Low Cut (Hz)" = 125
    "Hi Cut (kHz)" = 6.5
    "Mix" = 100
    "Level (dB)" = 0
    }
    }
    'B' branch:
    {

    Effect: "Metal DS" (Overdrive / Distortion), active - "yes"
    {
    "Dist" = 85
    "Bass" = 65
    "Middle" = 25
    "Treble" = 85
    "Level" = 25
    }

    Effect: "Org Crush" (Amp simulators), active - "yes"
    {
    "Gain" = 65
    "Bass" = 55
    "Middle" = 25
    "Treble" = 55
    "Presence" = 55
    "Master" = 50
    "Level (dB)" = -6
    }

    Effect: "IR Processor" (Cabinets), active - "yes"
    {
    "IR" = sandman_stereo_IR
    "Low Cut (Hz)" = 175
    "Hi Cut (kHz)" = 6.5
    "Mix" = 100
    "Level (dB)" = 0
    }

    Effect: "Chorus Clsc" (Modulation / Sfx), active - "yes"
    {
    "Speed" = 1.5
    "Depth" = 25
    "Center" = 1.5
    "Mode" = Stereo
    }
    }
    }

    Effect: "Studio EQ" (Dynamics / Filter), active - "yes"
    {
    "31 Hz" = 1
    "62 Hz" = 1
    "125 Hz" = 2
    "250 Hz" = 2
    "500 Hz" = -3
    "1 kHz" = 1
    "2 kHz" = 3
    "4 kHz" = 3
    "8 kHz" = 1
    "16 kHz" = -15
    "Level (dB)" = 3
    }

    Effect: "Room Rvb" (Reverberation), active - "yes"
    {
    "Time" = 3.0
    "PreDelay" = 0
    "LoDamp" = 50
    "HiDamp" = 40
    "Mix" = 25
    }

    Effect: "Studio Rvb" (Reverberation), active - "yes"
    {
    "Time" = 2.0
    "PreDelay" = 5
    "LoDamp" = 5
    "HiDamp" = 10
    "Mix" = 15
    }


    Note: You will need to download and install the ToneLib-GFX software to use the preset.
     

    Attached Files:

    RandyRhoads228 and nikkel like this.