Metallica Kill Em All Preset name: Kill Em All Comments: Updated Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 75"Mode" = Hard} Effect: "T-Scream" (Overdrive / Distortion), active - "yes" { "Drive" = 15"Tone" = 40"Level" = 10} Effect: "Metal DS" (Overdrive / Distortion), active - "yes" { "Dist" = 100"Bass" = 25"Middle" = 35"Treble" = 100"Level" = 25} Effect: "Org Crush" (Amp simulators), active - "yes" { "Gain" = 70"Bass" = 20"Middle" = 35"Treble" = 45"Presence" = 100"Master" = 30"Level (dB)" = 2} Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = -7"62 Hz" = -3"125 Hz" = 3"250 Hz" = -12"500 Hz" = 1"1 kHz" = -6"2 kHz" = -4"4 kHz" = -4"8 kHz" = -6"16 kHz" = 10"Level (dB)" = 6} Effect: "Splitter" (Dynamics / Filter) { "A-Bypass" = Off"A-Pan" = -25"A-Level" = 55"B-Bypass" = Off"B-Pan" = 25"B-Level" = 55 'A' branch: { Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = killem_L_IR"Low Cut (Hz)" = 125"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0} } 'B' branch: { Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = Killem_R_IR"Low Cut (Hz)" = 125"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0} } } Effect: "Plate Rvb" (Reverberation), active - "yes" { "Time" = 1.8"PreDelay" = 5"LoDamp" = 100"HiDamp" = 100"Mix" = 15} Effect: "AnalogDly" (Delay), active - "yes" { "Time" = 25"Feedback" = 25"Tone" = 55"Mix" = 40} Effect: "Chorus St" (Modulation / Sfx), active - "yes" { "Speed" = 1.8"Depth" = 25"Center" = 2.5"Mix" = 25} Note: You will need to download and install the ToneLib-GFX software to use the preset.