Metallica Ride The Lightning Preset name: Ride The Lightning Comments: Updated Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 70"Mode" = Hard} Effect: "T-Scream" (Overdrive / Distortion), active - "yes" { "Drive" = 60"Tone" = 40"Level" = 10} Effect: "Super OD" (Overdrive / Distortion), active - "yes" { "Drive" = 60"Tone" = 40"Level" = 40} Effect: "Org Crush" (Amp simulators), active - "yes" { "Gain" = 60"Bass" = 10"Middle" = 20"Treble" = 40"Presence" = 65"Master" = 30"Level (dB)" = 6} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = ride_LR_Stereo_IR"Low Cut (Hz)" = 125"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0} Effect: "Splitter" (Dynamics / Filter) { "A-Bypass" = Off"A-Pan" = 1"A-Level" = 55"B-Bypass" = Off"B-Pan" = 0"B-Level" = 55 'A' branch: { Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = OD-R112-V30-E906-P10-20"Low Cut (Hz)" = 150"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0} } 'B' branch: { Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = OD-R112-V30-SM58-P10-20"Low Cut (Hz)" = 150"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0} } } Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = -10"62 Hz" = -8"125 Hz" = -6"250 Hz" = -8"500 Hz" = -4"1 kHz" = -9"2 kHz" = -8"4 kHz" = -8"8 kHz" = -8"16 kHz" = 10"Level (dB)" = 6} Effect: "Chorus St" (Modulation / Sfx), active - "yes" { "Speed" = 0.3"Depth" = 25"Center" = 1.5"Mix" = 20} Effect: "AnalogDly" (Delay), active - "yes" { "Time" = 25"Feedback" = 25"Tone" = 55"Mix" = 20} Note: You will need to download and install the ToneLib-GFX software to use the preset.