Metallica Universal Tone Preset name: Metallica Universal Tone Comments: I use this preset with a Cort X1 guitar on a bridge pickup. The guitar is plugged into the line of the built-in audio card. In the Windows settings, the volume of the line input : 69 % You may have a completely different sound. Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 90"Mode" = Hard} Effect: "Auto Wah" (Dynamics / Filter), active - "no" { "Sense" = 50"Polarity" = Up"Attack" = 42"Style" = V848} Effect: "Cent OD" (Overdrive / Distortion), active - "yes" { "Drive" = 96"Tone" = 77"Level" = 38} Effect: "Dz Herbert" (Amp simulators), active - "yes" { "Gain" = 46"Bass" = 50"Middle" = 54"Treble" = 60"Presence" = 75"Master" = 100"Level (dB)" = 0} Effect: "HD Chamber Rvb" (Reverberation), active - "no" { "Time" = 8.2"PreLPF" = 79"PreDelay" = 61"HiDamp" = 21"LoGain" = -2.1"Mix" = 37} Effect: "Cab Sim" (Cabinets), active - "no" { "Model" = 1x8" Small Tweed"Level (dB)" = 0} Effect: "Guitar IRs Cab" (Cabinets), active - "yes" { "Model" = Peavey 5150 (4x12")"Mic Position" = Edge"Mic Distance" = Near"Low Cut (Hz)" = 60"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = -5} Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = 0"62 Hz" = 0"125 Hz" = 0"250 Hz" = 0"500 Hz" = -4"1 kHz" = 0"2 kHz" = 0"4 kHz" = 0"8 kHz" = 0"16 kHz" = 0"Level (dB)" = 0} Note: You will need to download and install the ToneLib-GFX software to use the preset.