Mick Mars 2FFL

Discussion in 'ToneLib-GFX presets' started by Brad D'Angelo, Feb 11, 2020.

  1. Brad D'Angelo

    Brad D'Angelo New Member

    Mick Mars 2FFL

    Preset name: The Gfx preset

    Comments:
    Use this preset with the pickup filter for stratocasters/single coils in bridge position. For humbuckers., turn pickup filter off

    Effects chain:
    [​IMG]


    Effect: "Pickup Mod" (Dynamics / Filter), active - "yes"
    {
    "Mode" = Single->Humbacker
    "Tone" = 100
    }

    Effect: "Noise Reducer" (Dynamics / Filter), active - "yes"
    {
    "Sens" = 100
    "Mode" = Soft
    }

    Effect: "T-Scream" (Overdrive / Distortion), active - "yes"
    {
    "Drive" = 22
    "Tone" = 50
    "Level" = 79
    }

    Effect: "Ms JCM900" (Amp simulators), active - "yes"
    {
    "Gain" = 51
    "Bass" = 61
    "Middle" = 81
    "Treble" = 60
    "Presence" = 72
    "Master" = 51
    "Level (dB)" = 0
    }

    Effect: "Guitar IRs Cab" (Cabinets), active - "yes"
    {
    "Model" = Marshall 1960A (4x12")
    "Mic Position" = Center
    "Mic Distance" = Near
    "Low Cut (Hz)" = 125
    "Hi Cut (kHz)" = 20.0
    "Mix" = 100
    "Level (dB)" = 4
    }

    Effect: "IR Processor" (Cabinets), active - "yes"
    {
    "IR" = englv30higherpres-01
    "Low Cut (Hz)" = 0
    "Hi Cut (kHz)" = 20.0
    "Mix" = 96
    "Level (dB)" = 0
    }

    Effect: "Cab Sim" (Cabinets), active - "no"
    {
    "Model" = 1x12" Blue Bell
    "Level (dB)" = 0
    }

    Effect: "Garage Rvb" (Reverb), active - "yes"
    {
    "Time" = 5.2
    "PreDelay" = 46
    "LoDamp" = 0
    "HiDamp" = 30
    "Mix" = 10
    }

    Effect: "Chorus St" (Modulation / Sfx), active - "yes"
    {
    "Speed" = 1.9
    "Depth" = 31
    "Center" = 4.4
    "Mix" = 40
    }

    Effect: "AnalogDly" (Delay), active - "no"
    {
    "Time" = 396
    "Feedback" = 11
    "Tone" = 65
    "Mix" = 45
    }

    Effect: "Noise Gate" (Dynamics / Filter), active - "yes"
    {
    "Mode" = Manual
    "Depth" = 50
    "Threshold" = 100
    "Attack" = 0
    "Hold" = 5
    "Decay" = 250
    }


    Note: You will need to download and install the ToneLib-GFX software to use the preset.
     

    Attached Files: