Mike Oldfield-Crystal Clear

Discussion in 'ToneLib-GFX presets' started by Egor2285384848, Jan 24, 2023.

  1. Egor2285384848

    Egor2285384848 New Member

    Mike Oldfield-Crystal Clear
    Preset name: Mike Oldfield-Crystal Clear

    Comments:
    Hello, this is my first attempt at recreating the tone of Mike Oldfield. I hope for advie and criticism. Use neck pickup and turn off "Pickup Mod" if you use single coil)

    Effects chain:
    [​IMG]

    Effect: "Noise Reducer" (Dynamics / Filter), active - "yes"
    {

    "Sens" = 100
    "Mode" = Soft
    }

    Effect: "Pickup Mod" (Dynamics / Filter), active - "yes"
    {

    "Mode" = Humbacker->Single
    "Tone" = 1
    }

    Effect: "Noise Gate" (Dynamics / Filter), active - "yes"
    {

    "Mode" = Manual
    "Depth" = 100
    "Threshold" = 100
    "Attack" = 500
    "Hold" = 1593
    "Decay" = 2000
    }

    Effect: "Compressor" (Dynamics / Filter), active - "yes"
    {

    "Sense" = 31
    "Level" = 35
    }

    Effect: "Fd Bassman" (Amp simulators), active - "yes"
    {

    "Gain" = 4
    "Bass" = 63
    "Middle" = 65
    "Treble" = 68
    "Presence" = 54
    "Master" = 58
    "Level (dB)" = 20
    }

    Effect: "Guitar IRs Cab" (Cabinets), active - "yes"
    {

    "Model" = Fender Twin Rev (2x12")
    "Mic Position" = Edge
    "Mic Distance" = Near
    "Low Cut (Hz)" = 60
    "Hi Cut (kHz)" = 19.5
    "Mix" = 100
    "Level (dB)" = 17
    }

    Effect: "CrossDly" (Delay), active - "yes"
    {

    "Time" = 36
    "Feedback" = 0
    "Tone" = 58
    "Sens" = 0
    "Mix" = 24
    }

    Effect: "Studio Rvb" (Reverberation), active - "yes"
    {

    "Time" = 7.4
    "PreDelay" = 32
    "LoDamp" = 0
    "HiDamp" = 12
    "Mix" = 18
    }

    Effect: "Chorus St" (Modulation / Sfx), active - "yes"
    {

    "Speed" = 3.2
    "Depth" = 51
    "Center" = 6.4
    "Mix" = 100
    }

    Effect: "Hall Rvb" (Reverberation), active - "yes"
    {

    "Time" = 9.4
    "PreDelay" = 61
    "LoDamp" = 49
    "HiDamp" = 17
    "Mix" = 28
    }

    Effect: "GuitarEQ" (Dynamics / Filter), active - "yes"
    {

    "160 Hz" = 0
    "400 Hz" = 0
    "800 Hz" = 0
    "1.6 kHz" = 0
    "3.2 kHz" = 0
    "6.4 kHz" = -6
    "12 kHz" = -6
    "Level (dB)" = 0
    }


    Note: You will need to download and install the ToneLib-GFX software to use the preset.
     

    Attached Files:

    Last edited: Jan 25, 2023