Motorhead Preset name: Motorhead Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 76"Mode" = Hard} Effect: "Splitter" (Dynamics / Filter) { "A-Bypass" = Off"A-Pan" = -25"A-Level" = 55"B-Bypass" = Off"B-Pan" = 25"B-Level" = 55"Width" = 0 'A' branch: { Effect: "Dist One" (Overdrive / Distortion), active - "yes" { "Drive" = 51"Tone" = 66"Level" = 73} Effect: "Ms JTM45" (Amp simulators), active - "yes" { "Gain" = 100"Bass" = 100"Middle" = 100"Treble" = 100"Presence" = 100"Master" = 100"Level (dB)" = 0} Effect: "Guitar Cab HD" (Cabinets), active - "yes" { "Model" = Marshall JCM2000 (4x12")"Mic Model" = Dynamic SM57"Mic Position" = Edge"Mic Distance" = Near"Low Cut (Hz)" = 79"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0} Effect: "GuitarEQ" (Dynamics / Filter), active - "yes" { "160 Hz" = 2"400 Hz" = 3"800 Hz" = 2"1.6 kHz" = 2"3.2 kHz" = 2"6.4 kHz" = -2"12 kHz" = 3"Level (dB)" = 0} } 'B' branch: { Effect: "T-Scream" (Overdrive / Distortion), active - "yes" { "Drive" = 61"Tone" = 57"Level" = 71} Effect: "Ms JTM45" (Amp simulators), active - "yes" { "Gain" = 100"Bass" = 100"Middle" = 100"Treble" = 100"Presence" = 100"Master" = 100"Level (dB)" = 0} Effect: "Guitar Cab HD" (Cabinets), active - "yes" { "Model" = Marshall JCM2000 (4x12")"Mic Model" = Dynamic SM57"Mic Position" = Edge"Mic Distance" = Near"Low Cut (Hz)" = 80"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0} Effect: "AnalogDly" (Delay), active - "yes" { "Time" = 644"Feedback" = 69"Tone" = 46"Mix" = 18} } } Effect: "Spring Rvb" (Reverberation), active - "yes" { "Time" = 7.0"PreDelay" = 0"LoDamp" = 16"HiDamp" = 26"Mix" = 42} Note: You will need to download and install the ToneLib-GFX software to use the preset.