MRX Rock Preset name: MRX Rock Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 80"Mode" = Soft} Effect: "Cent OD" (Overdrive / Distortion), active - "yes" { "Drive" = 10"Tone" = 30"Level" = 50} Effect: "Ms JCM800" (Amp simulators), active - "yes" { "Gain" = 45"Bass" = 45"Middle" = 60"Treble" = 60"Presence" = 65"Master" = 90"Level (dB)" = 3} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = Marshall 1960A e609_01_dc"Low Cut (Hz)" = 80"Hi Cut (kHz)" = 14.0"Mix" = 100"Level (dB)" = 0} Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = -3"62 Hz" = 3"125 Hz" = 3"250 Hz" = 0"500 Hz" = 0"1 kHz" = 0"2 kHz" = 0"4 kHz" = 0"8 kHz" = 0"16 kHz" = 0"Level (dB)" = 0} Effect: "GuitarEQ" (Dynamics / Filter), active - "yes" { "160 Hz" = 0"400 Hz" = 3"800 Hz" = 3"1.6 kHz" = 0"3.2 kHz" = 0"6.4 kHz" = 0"12 kHz" = -6"Level (dB)" = -1} Effect: "Garage Rvb" (Reverberation), active - "yes" { "Time" = 5.2"PreDelay" = 46"LoDamp" = 0"HiDamp" = 30"Mix" = 20} Effect: "Booster" (Dynamics / Filter), active - "no" { "Gain" = 30} Note: You will need to download and install the ToneLib-GFX software to use the preset.