Muse - Blackout solo Device: Zoom G1Xon Firmware: 1.21 Name on device: Blackout S Optimized for: Guitar Amp Effects chain: Patch comments: Matt Bellamy's tone on the solo of Blackout Spoiler: Patch settings Effect: "GreatMuff" (Overdrive / Distortion), active - "yes" "Gain" = 100"Tone" = 100"Level" = 100 Effect: "DZ DRIVE" (Amp simulators), active - "yes" "Gain" = 23"Tube" = 30"Level" = 93"Trebl" = 53"Middl" = 83"Bass" = 87"Prese" = 55"CAB" = DZ DRIVE 4x12"OUT" = COMBO POWER AMP Effect: "StompDly" (Delay / Reverb), active - "yes" "E.LVL" = 90"F.B" = 52"Time" = 360"Sync" = 3/16"Mode" = MONO"Tail" = Off"HiDMP" = 5 Effect: "GraphicEQ" (Dynamics / Filter), active - "yes" "160Hz" = 3"400Hz" = 2"800Hz" = 2"3.2kHz" = 4"6.4kHz" = 0"12kHz" = 12"Level" = 100 Effect: "ZNR" (Dynamics / Filter), active - "yes" "THRSH" = 10"DETCT" = GtrIn"Level" = 100 Patch Volume: 51 Note: This is a patch file, you will need to download and install the ToneLib software to use the patch.