Muse Uprising Patch Device: Zoom Ms-60b Firmware: 2.00 Name on device: MuseUprisi Optimized for: Guitar Amp Effects chain: Patch comments: Super difficult to simulate the muse sound for 'Uprising'. Depending on how your drummer plays this will determine your EQ settings. I found with my band the drummer and I were doubling up on certain frequencies and I had to take off some of the bass (this is this patch). This has been a lot of trial and error and a lot of time spent and so I thought I'd share with the community Spoiler: Patch settings Effect: "Ba Octave" (Modulation / Sfx), active - "yes" "Oct" = 24"Dry" = 100"Tone" = 9"Low" = 3"Mid" = 4"Level" = 32 Effect: "Bass Muff" (Overdrive / Distortion), active - "yes" "Gain" = 88"Tone" = 95"Level" = 100"Mode" = BsBST"Bal" = 100 Effect: "Ba Ensmbl" (Modulation / Sfx), active - "yes" "Depth" = 58"Rate" = 50"Mix" = 49"Tone" = 6"Level" = 93 Effect: "Ba GEQ" (Dynamics / Filter), active - "yes" "50Hz" = 6"120Hz" = 7"400Hz" = -3"500Hz" = -4"800Hz" = 11"4.5kHz" = 12"10kHz" = 12"Level" = 6 Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.