My NIB AttemptDevice: Zoom B1 Four Firmware: 2.00 Name on device: NIB Optimized for: Guitar Amp Effects chain: Patch comments: This is my best attempt at replicating the NIB sound. Mute NYC muff for the solo at the beginning of the song, then bring it in for the main riff *Note* - This non-conventional pedal chain order is because my bass amp is blown and this puts the least strain on the speaker, swap the order to match your liking, when testing on another AMP the conventional ordering worked pretty well I'm open to any criticism/recommendations Spoiler: Patch settings Effect: "High EQ" (Filter), active - "yes" "Type" = SHELF "Frequency" = 4600 "Gain" = 2.5 "Volume" = 50 Effect: "NYC Muff" (Overdrive / Distortion), active - "yes" "Sustain" = 58 "Tone" = 90 "Balance" = 59 "Volume" = 58 Effect: "ZNR" (Dynamics), active - "yes" "Detect" = EFXIN "Depth" = 50 "Threshold" = 65 "Decay" = 65 Effect: "Z-Syn" (Sfx), active - "yes" "FREQ" = 4 "Range" = 4 "Decay" = 53 "RESO" = 12 "Wave" = 0 "Tone" = 7 "BAL" = 58 "VOL" = 74 "Frequency" = 0 "Range" = 0 "Decay" = 0 "Resonance" = 0 "Wave" = SAW "Tone" = 0 "Balance" = 0 "Volume" = 0Patch Volume: 57 DSP Load: 39% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
