My Steve Vai patch! Device: Zoom G5n Firmware: 3.00 Name on device: Vai Optimized for: Phones/Speaker Effects chain: Patch comments: direct to an Alto TS210. Spoiler: Patch settings Effect: "ZNR" (Dynamics), active - "yes" "Detect" = GTRIN"Depth" = 65"Threshold" = 30"Decay" = 6 Effect: "WAH100" (Pedal), active - "no" "Frequency" = 36"Range" = 40"Dry" = 30"Volume" = 90 Effect: "TS Drive" (Overdrive / Distortion), active - "yes" "Gain" = 0"Boost" = Off"Tone" = 70"Volume" = 94 Effect: "Recti ORG" (Amp simulator), active - "yes" "Mode" = VNTG"Bass" = 47"Middle" = 45"Treble" = 70"Presence" = 70"Gain" = 77"Volume" = 76"SOLO" = 3 Effect: "ParaEQ" (Filter), active - "yes" "Frequency" = 12.0kHz"Q" = 0.6"Gain" = -3.0"Volume" = 80 Effect: "P-P Delay" (Delay), active - "yes" "Time" = 562"F.B." = 27"Mix" = 36"Tail" = Off Effect: "Room" (Reverb), active - "yes" "PreD" = 5"Decay" = 10"Mix" = 60"Tail" = Off Effect: "BGN4x12" (Cabinet), active - "yes" "MIC" = ON"D57: D421" = 50"Hi" = 50"Lo" = 25 Patch Volume: 38 DSP Load: 85% Note: This is a patch file, you will need to download and install the ToneLib software to use the patch.