nitram Device: Zoom B1X Four Firmware: 2.00 Name on device: Slap Back Optimized for: Phones/Speaker Effects chain: Patch comments: This setting, which uses Exciter, is good for slapping with backing parts. Spoiler: Patch settings Effect: "Bass Pre" (Overdrive / Distortion), active - "yes" "Bass" = 10"Middle" = -8"Treble" = 8"Volume" = 36 Effect: "LMT-76" (Dynamics), active - "no" "Input" = 57"Ratio" = 4:1"REL" = 63"Output" = 80 Effect: "Exciter" (Filter), active - "no" "Bass" = 38"Treble" = 32"Volume" = 100"ON/OFF" = UnLATCH Effect: "PDL Vol" (Pedal), active - "no" "Volume" = 100"Min" = 75"Max" = 43"Curve" = A Patch Volume: 102 DSP Load: 43% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.