Plexi 1959 mode drive

Discussion in 'Zoom G1/G1X Four' started by Raftul, Jun 14, 2022.

  1. Raftul

    Raftul New Member

    Plexi 1959 mode drive

    [​IMG]
    Device: Zoom G1 Four
    Firmware: 2.00

    Name on device: PlexiDrive
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    Strat with SSS Vintage single coil pickups, bridge position, great for rock rhytm and lead solo


    Effect: "ZNR" (Dynamics), active - "yes"
    "Detect" = GTRIN
    "Depth" = 100
    "Threshold" = 35
    "Decay" = 0

    Effect: "TS Drive" (Overdrive / Distortion), active - "yes"
    "Gain" = 0
    "Boost" = Off
    "Tone" = 25
    "Volume" = 100

    Effect: "MS 1959" (Amp simulator), active - "yes"
    "Bass" = 65
    "Middle" = 50
    "Treble" = 20
    "Presence" = 25
    "Input1" = 70
    "Input2" = 65
    "Volume" = 100

    Effect: "MS4x12GB" (Cabinet), active - "yes"
    "MIC" = ON
    "D57: D421" = 50
    "Hi" = 40
    "Lo" = 75

    Effect: "P-P Delay" (Delay), active - "yes"
    "Time" = 560
    "F.B." = 20
    "Mix" = 30
    "Tail" = Off

    Patch Volume: 100
    DSP Load: 66%


    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files: