Plexi Overdrive

Discussion in 'Zoom G3n/G3Xn/G5n' started by Codger12, Jun 6, 2018.

  1. Codger12

    Codger12 New Member

    Plexi Overdrive

    [​IMG]
    Device: Zoom G5n
    Firmware: 3.00

    Name on device: Plex Od
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    Plexi Modified Overdrive


    Effect: "ZNR" (Dynamics), active - "yes"
    "Detect" = EFXIN
    "Depth" = 100
    "Threshold" = 33
    "Decay" = 0

    Effect: "VioletDST" (Overdrive / Distortion), active - "no"
    "Gain" = 46
    "Tone" = 70
    "Voice" = 1
    "Volume" = 28

    Effect: "SpotBoost" (Overdrive / Distortion), active - "no"
    "Boost" = 35
    "Bass" = 0
    "Treble" = 0
    "ON/OFF" = LATCH

    Effect: "MS 1959" (Amp simulator), active - "yes"
    "Bass" = 25
    "Middle" = 38
    "Treble" = 50
    "Presence" = 100
    "Input1" = 26
    "Input2" = 37
    "Volume" = 76
    "SOLO" = 3

    Effect: "MS4x12" (Cabinet), active - "yes"
    "MIC" = ON
    "D57: D421" = 64
    "Hi" = 44
    "Lo" = 69

    Effect: "Exciter" (Filter), active - "yes"
    "Bass" = 7
    "Treble" = 19
    "Volume" = 77
    "ON/OFF" = LATCH

    Effect: "Air" (Reverb), active - "yes"
    "Size" = 18
    "REF" = 5
    "Mix" = 48
    "Tail" = Off

    Effect: "Hall" (Reverb), active - "yes"
    "PreD" = 49
    "Decay" = 10
    "Mix" = 46
    "Tail" = Off

    Patch Volume: 100
    DSP Load: 90%


    Note: This is a patch file, you will need to download and install the ToneLib software to use the patch.
     

    Attached Files:

  2. Codger12

    Codger12 New Member

    So to whoever voted my patch one star, how about you tell me why and how you are using it. It isnt supposed to be a Van Halen setting fyi.
     
    crillev and johnhager25 like this.
  3. Codger12

    Codger12 New Member

    Im not sure if these settings are included but the boost knob, vol knob, and tone knob are all hovering around 12 noon for best sound in my opinion..