Pneuma TOOL Justin Chancellor Device: Zoom B1X Four Firmware: 2.00 Name on device: PneumaTOOL Optimized for: Guitar Amp Effects chain: Patch comments: I used a PBass with tone all the way up and a 1mm pick. This is my first patch i uploaded and im new to this pedal. Maybe you have some things that could be changed? Would be cool to get some opinions. Spoiler: Patch settings Effect: "LMT-76" (Dynamics), active - "yes" "Input" = 42"Ratio" = 8:1"REL" = 40"Output" = 27 Effect: "Delay" (Delay), active - "yes" "Time" = 525"F.B." = 5"Mix" = 50"Tail" = Off Effect: "BaVinFLNG" (Modulation), active - "no" "Depth" = 71"Rate" = 11"Resonance" = 3"LoCut" = 340 Hz Effect: "EBH360" (Amp simulator), active - "yes" "Bass" = 0.0"MID-F" = 800Hz"Mid" = 1.5"Treble" = 4.0"Bright" = 68"Drive" = 63"Volume" = 32"CHARRA" = -9.5 Effect: "SVT8x10" (Cabinet), active - "yes" "DYN20" = 55"DYN57" = 55"Bottom" = 46"Balance" = 98 Patch Volume: 90 DSP Load: 61% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.