Ratt

Discussion in 'Zoom G1/G1X Four' started by nazym, Oct 15, 2025 at 2:08 PM.

  1. nazym

    nazym New Member

    Ratt

    [​IMG]
    Device: Zoom G1 Four
    Firmware: 2.00

    Name on device: Ratt
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    Ratt


    Effect: "TS Drive" (Overdrive / Distortion), active - "yes"
    "Gain" = 10
    "Boost" = Off
    "Tone" = 77
    "Volume" = 46

    Effect: "Recti ORG" (Amp simulator), active - "yes"
    "Mode" = VNTG
    "Bass" = 60
    "Middle" = 47
    "Treble" = 71
    "Presence" = 60
    "Gain" = 49
    "Volume" = 39

    Effect: "Gt GEQ 7" (Filter), active - "yes"
    "100" = 5.5
    "200" = 1.5
    "400" = -4.0
    "800" = 1.5
    "1.6k" = 5.0
    "3.2k" = 3.5
    "6.4k" = 2.5
    "VOL" = 58

    Effect: "RCT4x12" (Cabinet), active - "yes"
    "MIC" = OFF
    "D57: D421" = 50
    "Hi" = 100
    "Lo" = 57

    Effect: "TapeEcho" (Delay), active - "yes"
    "Time" = 351
    "F.B." = 49
    "Mix" = 45
    "Tail" = On

    Patch Volume: 54
    DSP Load: 67%


    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files: