RedStar Device: Zoom G1on Firmware: 1.21 Name on device: R3dSt4R ' Optimized for: Phones/Speaker Effects chain: Patch comments: High gain patch for les paul models, turn on the eq for a more sharpen distortion and the delay for solos Spoiler: Patch settings Effect: "ZNR" (Dynamics / Filter), active - "yes" "THRSH" = 14"DETCT" = EfxIn"Level" = 100 Effect: "ExtremeDS" (Overdrive / Distortion), active - "yes" "Gain" = 0"Tone" = 50"Level" = 50 Effect: "ALIEN" (Amp simulators), active - "yes" "Gain" = 50"Tube" = 39"Level" = 87"Trebl" = 73"Middl" = 40"Bass" = 42"Prese" = 75"CAB" = ALIEN 4x12"OUT" = STACK POWER AMP Effect: "GraphicEQ" (Dynamics / Filter), active - "no" "160Hz" = -1"400Hz" = -2"800Hz" = -3"3.2kHz" = 3"6.4kHz" = 5"12kHz" = 4"Level" = 85 Effect: "CarbonDly" (Delay / Reverb), active - "no" "DELAY" = 406"REGEN" = 55"MIX" = 65"MOD" = Off"WIDTH" = 50"SPEED" = 35"Tail" = On"Sync" = OFF Patch Volume: 100 Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.