Ride the Lightning Tone Preset name: Ride the Lightning Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 82"Mode" = Hard} Effect: "Auto Wah" (Dynamics / Filter), active - "no" { "Sense" = 50"Polarity" = Up"Attack" = 42"Style" = V848} Effect: "T-Scream" (Overdrive / Distortion), active - "yes" { "Drive" = 100"Tone" = 100"Level" = 100} Effect: "Ms JCM900" (Amp simulators), active - "yes" { "Gain" = 84"Bass" = 60"Middle" = 10"Treble" = 100"Presence" = 100"Master" = 100"Level (dB)" = 3} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = ride_LR_Stereo_IR"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 4} Effect: "HD Room Rvb" (Reverberation), active - "yes" { "Time" = 1.8"PreLPF" = 77"PreDelay" = 60"HiDamp" = 65"LoGain" = -3.5"Mix" = 33} Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = 0"62 Hz" = 0"125 Hz" = 0"250 Hz" = 0"500 Hz" = 0"1 kHz" = 0"2 kHz" = 0"4 kHz" = 0"8 kHz" = 0"16 kHz" = 0"Level (dB)" = 0} Note: You will need to download and install the ToneLib-GFX software to use the preset.