RIP Preset name: rip 2 Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 80"Mode" = Soft} Effect: "Cent OD" (Overdrive / Distortion), active - "yes" { "Drive" = 8"Tone" = 70"Level" = 70} Effect: "Splitter" (Dynamics / Filter) { "A-Bypass" = Off"A-Pan" = -25"A-Level" = 55"B-Bypass" = Off"B-Pan" = 25"B-Level" = 55"Width" = 0 'A' branch: { Effect: "Doubler" (Dynamics / Filter), active - "yes" { "A-Dly" = 75"A-Inv" = Off"A-Level" = 75"B-Dly" = 50"B-Inv" = Off"B-Level" = 50} Effect: "Splitter" (Dynamics / Filter) { "A-Bypass" = Off"A-Pan" = -25"A-Level" = 55"B-Bypass" = Off"B-Pan" = 25"B-Level" = 55"Width" = 0 'A' branch: { Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = 0"62 Hz" = 0"125 Hz" = 0"250 Hz" = 0"500 Hz" = 0"1 kHz" = 0"2 kHz" = 0"4 kHz" = 0"8 kHz" = 0"16 kHz" = 0"Level (dB)" = 0} Effect: "Ms JCM900" (Amp simulators), active - "yes" { "Gain" = 51"Bass" = 40"Middle" = 60"Treble" = 69"Presence" = 68"Master" = 50"Level (dB)" = 0} Effect: "Cab Sim" (Cabinets), active - "yes" { "Model" = 4x12" 1960 T75"Level (dB)" = 0} } 'B' branch: { Effect: "Slo 100" (Amp simulators), active - "yes" { "Gain" = 49"Bass" = 100"Middle" = 40"Treble" = 70"Presence" = 81"Master" = 50"Level (dB)" = 0} Effect: "Cab Sim" (Cabinets), active - "yes" { "Model" = 2x12" Silver Bell "Level (dB)" = 0} } } } 'B' branch: { Effect: "Bg Ecstasy" (Amp simulators), active - "yes" { "Gain" = 55"Bass" = 30"Middle" = 70"Treble" = 78"Presence" = 83"Master" = 50"Level (dB)" = 0} Effect: "Cab Sim" (Cabinets), active - "yes" { "Model" = 4x12" Cali v30"Level (dB)" = 0} } } Effect: "Garage Rvb" (Reverberation), active - "yes" { "Time" = 5.2"PreDelay" = 46"LoDamp" = 0"HiDamp" = 30"Mix" = 10} Note: You will need to download and install the ToneLib-GFX software to use the preset.
