Rock with wah always on...just try it Device: Zoom G3n Firmware: 2.20 Name on device: Always On Optimized for: Phones/Speaker Effects chain: Patch comments: The wah is always on in this patch. Keep it in the toe position for a normal rock tone and rock it when you need wah. This is great for those that have the G3n instead of the G3Xn This is a jam I did using this patch Spoiler: Patch settings Effect: "ChromeWah" (Pedal), active - "yes" "Frequency" = 100"Range" = 100"Dry" = 100"Volume" = 80 Effect: "DYN Drive" (Overdrive / Distortion), active - "yes" "Gain" = 78"Tone" = 58"Mode" = STACK"Volume" = 46 Effect: "Ambience" (Reverb), active - "yes" "PreD" = 29"Decay" = 81"Mix" = 66"Tail" = Off Effect: "Delay" (Delay), active - "yes" "Time" = Quarter-point"F.B." = 30"Mix" = 33"Tail" = On Effect: "LP-MONO" (Rhythm and Looper), active - "yes" "Start time" = Manual"Undo" = On"Stop" = Stop"Volume" = 80 Effect: "Rhythm" (Rhythm and Looper), active - "yes" "Pattern" = 8Beats3 4/4"Unknown1" = 0"Unknown2" = 0"Volume" = 80 Patch Volume: 80 DSP Load: 47% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.