Scorpions Preset name: Scorpions Comments: Scorpions tone with Custom IR ( NOTE ): Only turn on the Pickup Mods If you are using a Guitar with Single Coils, And the flanger and different EQ's is something you can turn on for your preferece, Enjoy. Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 72"Mode" = Hard} Effect: "Metal DS" (Overdrive / Distortion), active - "yes" { "Dist" = 50"Bass" = 0"Middle" = 30"Treble" = 0"Level" = 100} Effect: "Splitter" (Dynamics / Filter) { "A-Bypass" = Off"A-Pan" = -80"A-Level" = 54"B-Bypass" = Off"B-Pan" = 100"B-Level" = 52"Width" = 0 'A' branch: { Effect: "Doubler" (Dynamics / Filter), active - "no" { "A-Dly" = 75"A-Inv" = On"A-Level" = 75"B-Dly" = 50"B-Inv" = On"B-Level" = 50} Effect: "Ms JCM900" (Amp simulators), active - "yes" { "Gain" = 60"Bass" = 64"Middle" = 82"Treble" = 84"Presence" = 38"Master" = 63"Level (dB)" = 1} Effect: "Pickup Mod" (Dynamics / Filter), active - "yes" { "Mode" = Humbacker->Single"Tone" = 19} } 'B' branch: { Effect: "Slo 100" (Amp simulators), active - "yes" { "Gain" = 100"Bass" = 55"Middle" = 50"Treble" = 70"Presence" = 44"Master" = 90"Level (dB)" = 1} Effect: "Pickup Mod" (Dynamics / Filter), active - "yes" { "Mode" = Humbacker->Single"Tone" = 33} } } Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = scorpions-002"Low Cut (Hz)" = 70"Hi Cut (kHz)" = 13.0"Mix" = 100"Level (dB)" = 1} Effect: "Studio EQ" (Dynamics / Filter), active - "no" { "31 Hz" = -14"62 Hz" = -11"125 Hz" = -6"250 Hz" = -2"500 Hz" = 0"1 kHz" = 5"2 kHz" = 6"4 kHz" = 5"8 kHz" = 0"16 kHz" = -15"Level (dB)" = 2} Effect: "GuitarEQ" (Dynamics / Filter), active - "no" { "160 Hz" = 5"400 Hz" = 4"800 Hz" = 4"1.6 kHz" = 7"3.2 kHz" = 2"6.4 kHz" = 7"12 kHz" = -6"Level (dB)" = -1} Effect: "Chorus Clsc" (Modulation / Sfx), active - "yes" { "Speed" = 2.1"Depth" = 72"Center" = 10.0"Mode" = Mono} Effect: "Flanger" (Modulation / Sfx), active - "no" { "Speed" = 1.5"Depth" = 7"Reso" = 0"Center" = 7.7"Offset" = 0.0"Mix" = 75"Reset" = Off} Note: You will need to download and install the ToneLib-GFX software to use the preset.
