Simple HD Reverb

Discussion in 'Zoom MS-70CDR' started by wavesequence, Jun 11, 2020.

  1. wavesequence

    wavesequence New Member

    Simple HD Reverb

    [​IMG]
    Device: Zoom MS-70cdr
    Firmware: 2.10

    Name on device: Simple Rev
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    This is my first patch I created to process the fat sound of a mighty Roland Super JX (JX-10). Bought MS70-CDR on december 14, 2017 but never used once. Yesterday I made my first attempts and, once upgraded its firmware to 2.10, downloaded ToneLib and started programming from scratch. This application is a real Godsend, because I hate fumbling throug menus and submenus.


    Effect: "HD Reverb" (Delay / Reverb), active - "yes"
    "Decay" = 10
    "Tone" = 7
    "Mix" = 46
    "PreD" = 54
    "HPF" = 7
    "Level" = 100
    "Tail" = Off

    Effect: "GraphicEQ" (Dynamics / Filter), active - "yes"
    "160Hz" = 0
    "400Hz" = 0
    "800Hz" = 0
    "3.2kHz" = 0
    "6.4kHz" = 0
    "12kHz" = 0
    "Level" = 100

    Effect: "Exciter" (Dynamics / Filter), active - "yes"
    "Bass" = 0
    "Trebl" = 0
    "Level" = 100



    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files: