Slap Back

Discussion in 'Zoom B1/B1X Four' started by Antoniodeleon19, Dec 15, 2022.

  1. Antoniodeleon19

    Antoniodeleon19 New Member

    Slap Back

    [​IMG]
    Device: Zoom B1X Four
    Firmware: 2.00

    Name on device: Slap Back
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    This setting, which uses Exciter, is good for slapping with backing parts.


    Effect: "Bass Pre" (Overdrive / Distortion), active - "yes"
    "Bass" = 1
    "Middle" = 4
    "Treble" = 3
    "Volume" = 36

    Effect: "LMT-76" (Dynamics), active - "yes"
    "Input" = 40
    "Ratio" = 4:1
    "REL" = 28
    "Output" = 29

    Effect: "Exciter" (Filter), active - "yes"
    "Bass" = 38
    "Treble" = 32
    "Volume" = 100
    "ON/OFF" = LATCH

    Effect: "PDL Vol" (Pedal), active - "yes"
    "Volume" = 100
    "Min" = 0
    "Max" = 100
    "Curve" = A

    Patch Volume: 102
    DSP Load: 43%


    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files: