Slipknot Left Behind Tone Preset name: Slipknot IOWA Tone Comments: Yamaha Pac120H, Bridge Pickups (it seems there is factory pickups with alnico V) Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 50"Mode" = Hard} Effect: "Compressor" (Dynamics / Filter), active - "yes" { "Sense" = 45"Level" = 75} Effect: "Org Crush" (Amp simulators), active - "yes" { "Gain" = 70"Bass" = 50"Middle" = 50"Treble" = 50"Presence" = 50"Master" = 50"Level (dB)" = 0} Effect: "Splitter" (Dynamics / Filter) { "A-Bypass" = Off"A-Pan" = -50"A-Level" = 55"B-Bypass" = Off"B-Pan" = 50"B-Level" = 55"Width" = 100 'A' branch: { Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = TL-ORG CRSH - SKNOT-IOWA-R"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 16.0"Mix" = 100"Level (dB)" = 0} } 'B' branch: { Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = TL-ORG CRSH - SKNOT-IOWA-L"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 13.0"Mix" = 100"Level (dB)" = 0} } } Note: You will need to download and install the ToneLib-GFX software to use the preset.
