Solo metal truss Preset name: Solo metal truss Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 100"Mode" = Hard} Effect: "Booster" (Dynamics / Filter), active - "yes" { "Gain" = 47} Effect: "Compressor" (Dynamics / Filter), active - "yes" { "Sense" = 39"Level" = 64} Effect: "DuoPhase" (Modulation / Sfx), active - "yes" { "Speed A" = 4.1"Speed B" = 2.1"Depth" = 76"Reso" = 15"Mode" = Parallel} Effect: "Octave" (Modulation / Sfx), active - "yes" { "Direct" = 23"-1 Oct" = 0"-2 Oct" = 0} Effect: "Super OD" (Overdrive / Distortion), active - "yes" { "Drive" = 8"Tone" = 80"Level" = 91} Effect: "Slo 100" (Amp simulators), active - "yes" { "Gain" = 68"Bass" = 18"Middle" = 67"Treble" = 65"Presence" = 63"Master" = 66"Level (dB)" = 3} Effect: "Guitar IRs Cab" (Cabinets), active - "yes" { "Model" = Engl Pro (4x12")"Mic Position" = Middle"Mic Distance" = Near"Low Cut (Hz)" = 60"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0} Effect: "Chorus St" (Modulation / Sfx), active - "yes" { "Speed" = 1.9"Depth" = 31"Center" = 4.4"Mix" = 37} Effect: "ModDly" (Delay), active - "yes" { "Time" = 521"Feedback" = 30"Tone" = 62"Speed" = 1.6"Mix" = 74} Effect: "Hall Rvb" (Reverberation), active - "yes" { "Time" = 6.2"PreDelay" = 0"LoDamp" = 0"HiDamp" = 17"Mix" = 44} Note: You will need to download and install the ToneLib-GFX software to use the preset.