Steve R.V. Preset name: STEVE Ray V. Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 100"Mode" = Hard} Effect: "Booster" (Dynamics / Filter), active - "yes" { "Gain" = 49} Effect: "Compressor" (Dynamics / Filter), active - "yes" { "Sense" = 71"Level" = 25} Effect: "Dmb Drive" (Amp simulators), active - "yes" { "Gain" = 36"Bass" = 46"Middle" = 58"Treble" = 59"Presence" = 58"Master" = 54"Level (dB)" = 3} Effect: "Guitar IRs Cab" (Cabinets), active - "yes" { "Model" = Fender Bassman (2x15")"Mic Position" = Middle"Mic Distance" = Near"Low Cut (Hz)" = 60"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0} Effect: "Chorus St" (Modulation / Sfx), active - "yes" { "Speed" = 1.9"Depth" = 28"Center" = 4.4"Mix" = 25} Effect: "TapeEcho" (Delay), active - "yes" { "Time" = 316"Feedback" = 20"Tone" = 58"LoDamp" = 19"Mix" = 33} Effect: "Bounce Rvb" (Reverberation), active - "yes" { "Time" = 6.2"PreDelay" = 3"LoDamp" = 42"HiDamp" = 27"Mix" = 45} Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = 0"62 Hz" = -6"125 Hz" = 0"250 Hz" = 9"500 Hz" = 8"1 kHz" = 5"2 kHz" = 6"4 kHz" = 0"8 kHz" = 0"16 kHz" = 0"Level (dB)" = 0} Note: You will need to download and install the ToneLib-GFX software to use the preset.