Steve Vai Guitar Distortion Sound Device: Zoom G3n Firmware: 2.00 Name on device: Steve Vai Optimized for: Phones/Speaker Effects chain: Patch comments: Steve Vai Guitar Distortion Sound: Spoiler: Patch settings Effect: "TS Drive" (Overdrive / Distortion), active - "yes" "Gain" = 30"Boost" = Off"Tone" = 40"Volume" = 80 Effect: "XtasyBlue" (Amp simulator), active - "yes" "Bass" = 51"Middle" = 52"Treble" = 55"Presence" = 30"STRCT" = HI"Gain" = 70"Volume" = 50"SOLO" = 3 Effect: "BGN4x12" (Cabinet), active - "yes" "MIC" = ON"D57: D421" = 40"Hi" = 70"Lo" = 40 Effect: "Gt GEQ 7" (Filter), active - "yes" "100 Hz" = 0.0"200 Hz" = 0.0"400 Hz" = 0.0"800 Hz" = 0.0"1.6 kHz" = 0.0"3.2 kHz" = 0.0"6.4 kHz" = 0.0"Volume" = 80"100 Hz" = 0.0"200 Hz" = 0.0"400 Hz" = 0.0"800 Hz" = 0.0"1.6 kHz" = 0.0"3.2 kHz" = 0.0"6.4 kHz" = 0.0"Volume" = 80"Parameter set" = A Effect: "P-P Delay" (Delay), active - "yes" "Time" = Quarter"F.B." = 30"Mix" = 45"Tail" = Off Patch Volume: 76 DSP Load: 69% Note: This is a patch file, you will need to download and install the ToneLib software to use the patch.
Sounds great! I use Zoom ZNR noise reduction for all my patches, even low gain ones, it works so well you don't even realise it is on.