Steve Vai pedalboard GFX version: 3.0 Preset name: Steve Vai Optimized for: Phones/Speaker Effects chain: Patch comments: Helps to have an H/S/H guitar like Steve Vai's Jem, but you can play it with a humbucker Strat pretty well too! Enjoy. Spoiler: Patch settings Effect: "T-Scream" (Overdrive / Distortion), active - "yes" "Drive" = 22"Tone" = 80"Level" = 79 Effect: "Dist One" (Overdrive / Distortion), active - "no" "Drive" = 50"Tone" = 73"Level" = 69 Effect: "Compressor" (Dynamics / Filter), active - "yes" "Sense" = 21"Level" = 50 Effect: "Phaser" (Modulation / Sfx), active - "yes" "Model" = MXR Phase 90"Speed" = 1.0"Depth" = 100"Reso" = 26"Freq" = 5.0 Effect: "Wah Pedal" (Dynamics / Filter), active - "no" "Close Tone" = 35"Open Tone" = 40"Pedal Pos." = 83"Style" = V848 Effect: "MultiHeadDly" (Delay), active - "no" "Time" = 205"Feedback" = 40"Tone" = 58"MODE" = Rhythm X-0-X-X"Mix" = 60 Effect: "Ms JCM800" (Amp simulators), active - "yes" "Gain" = 50"Bass" = 50"Middle" = 50"Treble" = 50"Presence" = 50"Master" = 50"Output" = 50"Level (dB)" = 0 Effect: "Guitar IRs Cab" (Cabinets), active - "yes" "Model" = Fender Twin Rev (2x12")"Mic Position" = Middle"Mic Distance" = Near"Low Cut (Hz)" = 60"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0 Note: This is a ToneLib-GFX preset file, you will need to download and install the ToneLib-GFX software to use the preset.
