Strangler Bass

Discussion in 'Zoom B1on/B1Xon' started by Paul Abrahams, Feb 7, 2021.

  1. Paul Abrahams

    Paul Abrahams New Member

    Strangler Bass

    [​IMG]
    Device: Zoom B1Xon
    Firmware: 1.30

    Name on device: Strangler
    Optimized for: Guitar Amp

    Effects chain:
    [​IMG]

    Patch comments:
    This bass patch will get you close to JJ Burnel from The Stranglers. Depending on your Cabs add more bottom end to taste and a touch of distortion if needed.

    Precision Bass, Round Wound Strings, Tone full
    Jazz Bass, Round Wound Strings, Tone Full (neck pickup)

    My Amp Settings:

    Genz Benz STLMax 9.2 (cabs whatever)

    Tube Input Gain 6
    Vol Gain 6
    Low (80Hz) Flat
    Low Mid (120Hz) Flat
    High Mids (2-3K slight boost)
    High Flat

    Contour
    40Hz off
    600Hz -6db
    HF off


    Effect: "BassDrive" (Overdrive / Distortion), active - "yes"
    "Bass" = 1
    "Trebl" = 1
    "Prese" = 1
    "Gain" = 100
    "Blend" = 50
    "Level" = 10
    "Mid" = 3

    Effect: "G-Krueger" (Amp simulators), active - "yes"
    "Bass" = 6
    "Mid" = 4
    "Trebl" = 5
    "Mid_F" = 1.6kHz
    "Gain" = 40
    "Level" = 40
    "Color" = Off
    "CAB" = Gallien Krueger 410RBH
    "Mix" = 50

    Patch Volume: 100


    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files: