Strato drive tone for solos

Discussion in 'Zoom G3n/G3Xn/G5n' started by Mortem_Noom, Feb 9, 2023.

  1. Mortem_Noom

    Mortem_Noom New Member

    Strato drive tone for solos

    [​IMG]
    Device: Zoom G3Xn
    Firmware: 2.20

    Name on device: Twnr+Ms Ov
    Optimized for: Guitar Amp

    Effects chain:
    [​IMG]

    Patch comments:
    This blues setting combines TS Drive and FD TWNR with Ms 4x12.


    Effect: "ZNR" (Dynamics), active - "yes"
    "Detect" = EFXIN
    "Depth" = 100
    "Threshold" = 30
    "Decay" = 4

    Effect: "TS Drive" (Overdrive / Distortion), active - "yes"
    "Gain" = 68
    "Boost" = Off
    "Tone" = 40
    "Volume" = 70

    Effect: "FD TWNR" (Amp simulator), active - "yes"
    "Bass" = 80
    "Middle" = 60
    "Treble" = 90
    "Bright" = OFF
    "Gain" = 38
    "Volume" = 100
    "Depth" = 50
    "SPEED" = 50

    Effect: "MS4x12" (Cabinet), active - "yes"
    "MIC" = OFF
    "D57: D421" = 100
    "Hi" = 90
    "Lo" = 90

    Effect: "TapeEcho" (Delay), active - "yes"
    "Time" = 505
    "F.B." = 64
    "Mix" = 45
    "Tail" = Off

    Effect: "Spring" (Reverb), active - "yes"
    "PreD" = 5
    "Decay" = 20
    "Mix" = 30
    "Tail" = Off

    Patch Volume: 50
    DSP Load: 57%


    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files:

  2. Matheus Castello

    Matheus Castello New Member

    someone could please explain why the drive, compress, dist effects are always before the amp?
     
  3. hurricaneabel

    hurricaneabel Member

    try to place the drive in front of the amp and you will see that the sound is not so good, that's why usually the drivers are placed after the amp, except in cases of treble or some booster.