super drive solo Device: Zoom G3Xn Firmware: 2.20 Name on device: driverb Optimized for: Guitar Amp Effects chain: Patch comments: My own drive setup for big solos that needs a lingering reverb and delay. You can tweak mix level of delay and reverb Spoiler: Patch settings Effect: "Comp" (Dynamics), active - "yes" "Sense" = 7"Attack" = Slow"Tone" = 5"Volume" = 70 Effect: "SweetDrv" (Overdrive / Distortion), active - "yes" "Gain" = 60"Tone" = 43"Focus" = 75"Volume" = 57 Effect: "DIST Plus" (Overdrive / Distortion), active - "yes" "Gain" = 81"Volume" = 87"DryMx" = 43"Comp" = MOD1 Effect: "ZNR" (Dynamics), active - "yes" "Detect" = GTRIN"Depth" = 100"Threshold" = 30"Decay" = 0 Effect: "OutputBST" (Overdrive / Distortion), active - "yes" "Range" = 5"Boost" = 30"Tone" = 50"Volume" = 80 Effect: "Spring" (Reverb), active - "yes" "PreD" = 1"Decay" = 20"Mix" = 50"Tail" = Off Effect: "TapeEcho" (Delay), active - "yes" "Time" = 561"F.B." = 64"Mix" = 38"Tail" = On Patch Volume: 100 DSP Load: 73% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.