The crunch blues

Discussion in 'ToneLib-GFX presets' started by truss van halen, Jan 15, 2021.

  1. truss van halen

    truss van halen Well-Known Member

    The crunch blues

    Preset name: The Crunch blues

    Comments:
    hum

    Effects chain:
    [​IMG]


    Effect: "Noise Reducer" (Dynamics / Filter), active - "yes"
    {
    "Sens" = 94
    "Mode" = Soft
    }

    Effect: "Booster" (Dynamics / Filter), active - "yes"
    {
    "Gain" = 41
    }

    Effect: "Compressor" (Dynamics / Filter), active - "yes"
    {
    "Sense" = 21
    "Level" = 51
    }

    Effect: "GuitarEQ" (Dynamics / Filter), active - "yes"
    {
    "160 Hz" = 0
    "400 Hz" = 1
    "800 Hz" = 5
    "1.6 kHz" = 4
    "3.2 kHz" = 3
    "6.4 kHz" = 2
    "12 kHz" = 1
    "Level (dB)" = 0
    }

    Effect: "Fd Twin" (Amp simulators), active - "yes"
    {
    "Gain" = 66
    "Bass" = 40
    "Middle" = 57
    "Treble" = 53
    "Presence" = 50
    "Master" = 57
    "Level (dB)" = 5
    }

    Effect: "Guitar IRs Cab" (Cabinets), active - "yes"
    {
    "Model" = Fender Deluxe Rev (1x12")
    "Mic Position" = Middle
    "Mic Distance" = Near
    "Low Cut (Hz)" = 60
    "Hi Cut (kHz)" = 20.0
    "Mix" = 100
    "Level (dB)" = 0
    }

    Effect: "IR Processor" (Cabinets), active - "yes"
    {
    "IR" = Cab IR Sample1
    "Low Cut (Hz)" = 54
    "Hi Cut (kHz)" = 20.0
    "Mix" = 100
    "Level (dB)" = 0
    }

    Effect: "Chorus Clsc" (Modulation / Sfx), active - "yes"
    {
    "Speed" = 2.4
    "Depth" = 33
    "Center" = 2.6
    "Mode" = Vibrato
    }

    Effect: "AnalogDly" (Delay), active - "yes"
    {
    "Time" = 380
    "Feedback" = 32
    "Tone" = 56
    "Mix" = 50
    }

    Effect: "Spring Rvb" (Reverberation), active - "yes"
    {
    "Time" = 4.9
    "PreDelay" = 0
    "LoDamp" = 16
    "HiDamp" = 26
    "Mix" = 37
    }

    Effect: "Studio EQ" (Dynamics / Filter), active - "yes"
    {
    "31 Hz" = 0
    "62 Hz" = 0
    "125 Hz" = 0
    "250 Hz" = 4
    "500 Hz" = 4
    "1 kHz" = 0
    "2 kHz" = 0
    "4 kHz" = 0
    "8 kHz" = 0
    "16 kHz" = 0
    "Level (dB)" = 4
    }


    Note: You will need to download and install the ToneLib-GFX software to use the preset.
     

    Attached Files:

    StefanD and matwiej like this.