The Cure - Push

Discussion in 'Zoom MS-50G' started by rbreit, Jan 10, 2020.

  1. rbreit

    rbreit New Member

    The Cure - Push

    [​IMG]
    Device: Zoom Ms-50g
    Firmware: 3.10

    Name on device: Push Cure
    Optimized for: Guitar Amp

    Effects chain:
    [​IMG]

    Patch comments:
    My first MS-50G patch, be kind!

    'Push' by The Cure. Album: 'The Head on the Door'


    Effect: "ZNR" (Dynamics / Filter), active - "yes"
    "THRSH" = 10
    "DETCT" = EfxIn
    "Level" = 100

    Effect: "OverDrive" (Overdrive / Distortion), active - "yes"
    "Gain" = 50
    "Tone" = 60
    "Level" = 100

    Effect: "CE-Cho5" (Modulation / Sfx), active - "yes"
    "E.LVL" = 80
    "RATE" = 50
    "DEPTH" = 66
    "LOW" = 43
    "HIGH" = 50
    "MODE" = MONO

    Effect: "CarbonDly" (Delay / Reverb), active - "yes"
    "DELAY" = 450
    "REGEN" = 30
    "MIX" = 35
    "MOD" = Off
    "WIDTH" = 31
    "SPEED" = 28
    "Tail" = Off
    "Sync" = OFF

    Effect: "Hall" (Delay / Reverb), active - "yes"
    "Decay" = 10
    "Tone" = 5
    "Mix" = 46
    "PreD" = 49
    "Level" = 100
    "Tail" = Off



    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files: