Tim Commerford RATM First Album.Device: Zoom B1 Four Firmware: 2.00 Name on device: RATM 1st Optimized for: Phones/Speaker Effects chain: Patch comments: Hello, I use a Cort DLX V plus bass, remember to adjust the parameters to taste to get even closer to the bass tone. Timmy C. used a Stingray type bass on the first album. Use the bridge pickup only and the Bass DVR active for more gain. Please pass on any improvements you make to the patch so we can take them into account. Spoiler: Patch settings Effect: "Bass DRV" (Overdrive / Distortion), active - "yes" "Bass" = 65 "Treble" = 92 "PRSNC" = 67 "Blend" = 100 "Gain" = 15 "VOL" = 62 "MID-F" = 1.0kHz "MID" = 92 Effect: "EP Stomp" (Overdrive / Distortion), active - "yes" "Gain" = 0 "Bass" = 7 "Treble" = 4 "Volume" = 78 Effect: "Dark OD" (Overdrive / Distortion), active - "yes" "Gain" = 30 "Attack" = Boost "Blend" = 40 "Volume" = 100 Effect: "AMPG SVT" (Amp simulator), active - "yes" "Bass" = 3.0 "MID-F" = 800Hz "Middle" = 8.0 "Treble" = 9.5 "Gain" = 27 "Ultra" = HI "Volume" = 80 Effect: "SVT8x10" (Cabinet), active - "yes" "DYN20" = 65 "DYN57" = 65 "Bottom" = 60 "Balance" = 100Patch Volume: 60 DSP Load: 84% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.