ToolishDevice: Zoom B3n Firmware: 2.00 Name on device: Toolish Optimized for: Phones/Speaker Effects chain: Patch comments: So, after messing around with my new zoom b3n i wanted to create an aggressive,clear sound with a little bit of that metallic sound of Justin Chancellor from Tool. I tested it with 3 different basses. A squier precision with flat strings 50-105 A cort action plus with nickel strings 45-105 A warwick rockbass std streamer with nickel strings 45-105If you want a more "clanky" sound raise the Character from the EBH360 I got a nice metal sound with the cort bass. With the Squier P i think it was exactly the sound i had in my mind. Aggressive,clanky but also darker because of the flat strings i suppose. With the warwick rb it was much darker and muddier because of the humbuckers and i didnt like it so much. Maybe with a jazz bass will sound better Spoiler: Patch settings Effect: "MB Comp" (Dynamics), active - "yes" "Comp" = 70 "LoTHR" = 50 "HiTHR" = 50 "Volume" = 25 Effect: "Bass Pre" (Overdrive / Distortion), active - "yes" "Bass" = 0 "Middle" = 3 "Treble" = 2 "Volume" = 50 Effect: "Splitter" (Filter), active - "yes" "Frequency" = 125Hz "Lo" = 60 "Hi" = 36 "Volume" = 50 Effect: "EBH360" (Amp simulator), active - "yes" "Bass" = 2.5 "MID-F" = 630Hz "Mid" = 0.0 "Treble" = 0.0 "Bright" = 30 "Drive" = 30 "Volume" = 25 "CHARRA" = 0.5 Effect: "EB4x10TW" (Cabinet), active - "yes" "DYN20" = 70 "DYN57" = 85 "Bottom" = 44 "Balance" = 100Patch Volume: 100 DSP Load: 70% Note: This is a patch file, you will need to download and install the ToneLib software to use the patch.