Tremor

Discussion in 'Zoom B1/B1X Four' started by Mod7, Aug 20, 2020.

  1. Mod7

    Mod7 New Member

    Tremor

    [​IMG]
    Device: Zoom B1 Four
    Firmware: 2.00

    Name on device: Tremor
    Optimized for: Guitar Amp

    Effects chain:
    [​IMG]

    Patch comments:
    A clean octave down sound without too much rumble and the possibility to cut a bit of the boxy sounding frequencies.


    Effect: "Ba Octave" (Modulation), active - "yes"
    "Oct" = 50
    "Lo" = 6
    "Hi" = 4
    "Dry" = 100

    Effect: "Low EQ" (Filter), active - "yes"
    "Type" = HPF
    "Frequency" = 80
    "Gain" = -12.0
    "Volume" = 100

    Effect: "MB Comp" (Dynamics), active - "yes"
    "Comp" = 50
    "LoTHR" = 60
    "HiTHR" = 50
    "Volume" = 50

    Effect: "BassPEQ" (Filter), active - "no"
    "Frequency" = 250Hz
    "Q" = 2.0
    "Gain" = -9.0
    "Volume" = 100

    Patch Volume: 100
    DSP Load: 37%


    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files:

  2. Baileywa

    Baileywa Member

    B1Xfour version
     

    Attached Files: