truss Preset name: Top solo phaser strato Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 85"Mode" = Hard} Effect: "Super OD" (Overdrive / Distortion), active - "yes" { "Drive" = 61"Tone" = 81"Level" = 35} Effect: "Ms Plexi" (Amp simulators), active - "yes" { "Gain" = 74"Bass" = 50"Middle" = 58"Treble" = 69"Presence" = 66"Master" = 50"Level (dB)" = 3} Effect: "Guitar IRs Cab" (Cabinets), active - "yes" { "Model" = Marshall 1960A (4x12")"Mic Position" = Center"Mic Distance" = Middle"Low Cut (Hz)" = 39"Hi Cut (kHz)" = 15.0"Mix" = 100"Level (dB)" = 0} Effect: "Phaser" (Modulation / Sfx), active - "yes" { "Model" = MXR Phase 90"Speed" = 3.0"Depth" = 29"Reso" = 19"Freq" = 8.2} Effect: "Flanger" (Modulation / Sfx), active - "no" { "Speed" = 2.5"Depth" = 18"Reso" = 35"Center" = 5.6"Offset" = 4.9"Mix" = 50"Reset" = Off} Effect: "Octave" (Modulation / Sfx), active - "yes" { "Direct" = 34"-1 Oct" = 8"-2 Oct" = 8} Effect: "CrossDly" (Delay), active - "yes" { "Time" = 644"Feedback" = 52"Tone" = 29"Sens" = 49"Mix" = 57} Effect: "Spring Rvb" (Reverb), active - "yes" { "Time" = 5.1"PreDelay" = 41"LoDamp" = 16"HiDamp" = 26"Mix" = 42} Note: You will need to download and install the ToneLib-GFX software to use the preset.