Twin Cort KX300 Preset name: Fender Twin 1 Effects chain: Spoiler: Preset settings Effect: "Booster" (Dynamics / Filter), active - "yes" { "Gain" = 34} Effect: "Compressor" (Dynamics / Filter), active - "yes" { "Sense" = 18"Level" = 31} Effect: "Tube Warmth" (Dynamics / Filter), active - "yes" { "Input" = 64"Warmth" = 67"Level" = 71} Effect: "Fd Twin" (Amp simulators), active - "yes" { "Gain" = 31"Bass" = 61"Middle" = 100"Treble" = 64"Presence" = 63"Master" = 67"Level (dB)" = 5} Effect: "Splitter" (Dynamics / Filter) { "A-Bypass" = Off"A-Pan" = 0"A-Level" = 70"B-Bypass" = Off"B-Pan" = 0"B-Level" = 34"Width" = 0 'A' branch: { Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = 01_Twin73_dome_edge_L19"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0} } 'B' branch: { Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = 04_Twin73_center_e609"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0} } } Effect: "Splitter" (Dynamics / Filter) { "A-Bypass" = Off"A-Pan" = -35"A-Level" = 55"B-Bypass" = Off"B-Pan" = 35"B-Level" = 55"Width" = 0 'A' branch: { Effect: "TapeEcho" (Delay), active - "yes" { "Time" = Note sync, 1/16 Dotted"Feedback" = 57"Tone" = 35"LoDamp" = 33"Mix" = 28} } 'B' branch: { Effect: "TapeEcho" (Delay), active - "yes" { "Time" = Note sync, 1/8 Dotted"Feedback" = 38"Tone" = 65"LoDamp" = 19"Mix" = 31} } } Effect: "Chamber Rvb" (Reverberation), active - "yes" { "Time" = 4.1"PreDelay" = 42"LoDamp" = 18"HiDamp" = 13"Mix" = 31} Note: You will need to download and install the ToneLib-GFX software to use the preset.