Very Heavy

Discussion in 'Zoom G1on/G1Xon' started by Kovács László, May 17, 2021.

  1. Very Heavy
    [​IMG]
    Device: Zoom G1Xon
    Firmware: 1.21

    Name on device: A2 MENTAL3
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    Loud and heavy for home, it's OK without amplifire. Pedal to output vol.


    Effect: "ZNR" (Dynamics / Filter), active - "yes"
    "THRSH" = 13
    "DETCT" = EfxIn
    "Level" = 125

    Effect: "MetalWRLD" (Overdrive / Distortion), active - "yes"
    "Gain" = 60
    "Tone" = 50
    "Level" = 100

    Effect: "ALIEN" (Amp simulators), active - "yes"
    "Gain" = 52
    "Tube" = 26
    "Level" = 103
    "Trebl" = 34
    "Middl" = 38
    "Bass" = 11
    "Prese" = 21
    "CAB" = ALIEN 4x12
    "OUT" = LINE

    Effect: "StompDly" (Delay / Reverb), active - "yes"
    "E.LVL" = 19
    "F.B" = 38
    "Time" = 360
    "Sync" = OFF
    "Mode" = MONO
    "Tail" = Off
    "HiDMP" = 5

    Effect: "ParaEQ" (Dynamics / Filter), active - "yes"
    "Freq1" = 3.2kHz
    "Q1" = 0.5
    "Gain1" = 10
    "Freq2" = 8.0kHz
    "Q2" = 1
    "Gain2" = -10
    "Level" = 100
    Patch Volume: 110


    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files:

    Last edited: May 17, 2021