Vintage Heavy Metal

Discussion in 'ToneLib-GFX presets' started by Pep, Jul 20, 2019.

  1. Pep

    Pep New Member

    Vintage Heavy Metal
    Preset name: Vintage Heavy Metal

    Comments:
    Inspired in the classic Marshall 1987 + 1959 two lead ensemble. Use the drive volume of the first amp for adjust the ensemble overdrive.

    Effects chain:
    [​IMG]

    Effect: "Noise Gate" (Dynamics / Filter), active - "yes"
    "Detect" = Gtr In
    "Mode" = Manual
    "Depth" = 20
    "Threshold" = 80
    "Attack" = 0
    "Hold" = 5
    "Decay" = 250

    Effect: "Ms JTM45" (Amp simulators), active - "yes"
    "Gain" = 80
    "Bass" = 100
    "Middle" = 100
    "Treble" = 100
    "Presence" = 50
    "Master" = 100
    "Output" = 50
    "Level (dB)" = 0

    Effect: "Noise Reducer" (Dynamics / Filter), active - "yes"
    "Sens" = 20
    "Mode" = Hard

    Effect: "Ms Plexi" (Amp simulators), active - "yes"
    "Gain" = 60
    "Bass" = 100
    "Middle" = 100
    "Treble" = 100
    "Presence" = 50
    "Master" = 100
    "Output" = 50
    "Level (dB)" = 0

    Effect: "TapeEcho" (Delay), active - "yes"
    "Time" = Note sync, 1/8 Dotted
    "Feedback" = 62
    "Tone" = 79
    "LoDamp" = 19
    "Mix" = 44

    Effect: "Guitar IRs Cab" (Cabinets), active - "yes"
    "Model" = Marshall 1960A (4x12")
    "Mic Position" = Middle
    "Mic Distance" = Middle
    "Low Cut (Hz)" = 60
    "Hi Cut (kHz)" = 20.0
    "Mix" = 100
    "Level (dB)" = 2


    Note: You will need to download and install the ToneLib-GFX software to use the preset.
     

    Attached Files:

    Last edited: Jul 20, 2019
    LINDSAY ROSS, Isack Rojas and TRITONE like this.