Violao natural

Discussion in 'Zoom G3n/G3Xn/G5n' started by Adilso, May 7, 2020.

  1. Adilso

    Adilso New Member

    Violao natural

    [​IMG]
    Device: Zoom G5n
    Firmware: 3.00

    Name on device: Violao
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    Vioão natural.


    Effect: "Comp" (Dynamics), active - "yes"
    "Sense" = 5
    "Attack" = Fast
    "Tone" = 7
    "Volume" = 80

    Effect: "Gt GEQ" (Filter), active - "yes"
    "160 Hz" = 2.0
    "400 Hz" = 0.0
    "800 Hz" = 0.0
    "3.2 kHz" = 2.0
    "6.4 kHz" = 7.5
    "12.0 kHz" = 10.0
    "Volume" = 80
    "CH SEL" = UnLATCH
    "160 Hz" = 0.0
    "400 Hz" = 0.0
    "800 Hz" = 1.5
    "3.2 kHz" = 8.0
    "6.4 kHz" = 12.0
    "12.0 kHz" = 12.0
    "Volume" = 0
    "CH SEL" = LATCH
    "Parameter set" = A

    Effect: "StereoCho" (Modulation), active - "no"
    "Depth" = 31
    "Rate" = 30
    "Tone" = 7
    "Mix" = 60

    Effect: "Delay" (Delay), active - "no"
    "Time" = Quarter
    "F.B." = 30
    "Mix" = 31
    "Tail" = On

    Effect: "LP-MONO" (Rhythm and Looper), active - "yes"
    "Start time" = Manual
    "Undo" = On
    "Stop" = Stop
    "Volume" = 80

    Effect: "PDL Vol" (Pedal), active - "yes"
    "Volume" = 100
    "Min" = 0
    "Max" = 100
    "Curve" = B

    Effect: "Hall" (Reverb), active - "yes"
    "PreD" = 49
    "Decay" = 10
    "Mix" = 46
    "Tail" = Off

    Patch Volume: 100
    DSP Load: 35%


    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files: