Vox AC30 (Rory Gallager Setup) Preset name: Vox AC30 (Rory Gallager) Comments: Rory Gallager Setup (Original with Dallas Rangemaster Treblebooster) ; Single-Coil-Strat on Position 2 (Bridge + Center) Effects chain: Spoiler: Preset settings Effect: "B-Scream" (Overdrive / Distortion), active - "yes" "Drive" = 52"Tone" = 50"Level" = 82 Effect: "Vx Ac30" (Amp simulators), active - "yes" "Gain" = 20"Bass" = 50"Middle" = 40"Treble" = 82"Presence" = 80"Master" = 86"Output" = 50"Level (dB)" = 10 Effect: "Guitar IRs Cab" (Cabinets), active - "yes" "Model" = Vox AC30 (2x12")"Mic Position" = Middle"Mic Distance" = Near"Low Cut (Hz)" = 60"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = -7 Effect: "Spring Rvb" (Reverb), active - "yes" "Time" = 7.0"PreDelay" = 0"LoDamp" = 16"HiDamp" = 26"Mix" = 42 Note: You will need to download and install the ToneLib-GFX software to use the preset.
Good tone, great for the pinched harmonics Effects chain: Spoiler: Preset settings Effect: "B-Scream" (Overdrive / Distortion), active - "yes" "Drive" = 52"Tone" = 50"Level" = 82 Effect: "Vx Ac30" (Amp simulators), active - "yes" "Gain" = 20"Bass" = 50"Middle" = 40"Treble" = 82"Presence" = 80"Master" = 86"Output" = 50"Level (dB)" = 10 Effect: "Guitar IRs Cab" (Cabinets), active - "yes" "Model" = Vox AC30 (2x12")"Mic Position" = Middle"Mic Distance" = Near"Low Cut (Hz)" = 60"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = -7 Effect: "Spring Rvb" (Reverb), active - "yes" "Time" = 7.0"PreDelay" = 0"LoDamp" = 16"HiDamp" = 26"Mix" = 42 Note: You will need to download and install the ToneLib-GFX software to use the preset.[/QUOTE]
Like that preset very much. Works fine also with humbucker. JUst would replace the spring reverb (too much ringing) by an e.g. chamber reverb