VPS010-G10 Vintage Celestion Preset name: VPS010-G10 Vintage Celestion Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 56"Mode" = Hard} Effect: "Compressor" (Dynamics / Filter), active - "yes" { "Sense" = 31"Level" = 96} Effect: "Cent OD" (Overdrive / Distortion), active - "yes" { "Drive" = 66"Tone" = 60"Level" = 10} Effect: "Splitter" (Dynamics / Filter) { "A-Bypass" = Off"A-Pan" = -25"A-Level" = 55"B-Bypass" = Off"B-Pan" = 25"B-Level" = 55"Width" = 0 'A' branch: { Effect: "Ms Plexi" (Amp simulators), active - "yes" { "Gain" = 75"Bass" = 50"Middle" = 67"Treble" = 84"Presence" = 71"Master" = 49"Level (dB)" = 0} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = G10 Vintage 210 C Hi-Gn 421+57 Celestion"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 5} } 'B' branch: { Effect: "Fd Twin" (Amp simulators), active - "yes" { "Gain" = 50"Bass" = 76"Middle" = 80"Treble" = 70"Presence" = 74"Master" = 50"Level (dB)" = 0} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = G10 Vintage 210 C TLM 107 RoomL Celestion"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 5} } } Effect: "RingMod" (Modulation / Sfx), active - "yes" { "Direct" = 53"Effect" = 58"Cutoff" = 10.0"Osc" = 0.0} Effect: "Studio Rvb" (Reverberation), active - "yes" { "Time" = 7.4"PreDelay" = 32"LoDamp" = 0"HiDamp" = 12"Mix" = 26} Effect: "Chorus St" (Modulation / Sfx), active - "yes" { "Speed" = 1.9"Depth" = 31"Center" = 4.4"Mix" = 32} Effect: "StereoDly" (Delay), active - "no" { "Time" = 756"Feedback" = 40"Tone" = 72"Sens" = 80"Mix" = 16} Effect: "HD Hall Rvb" (Reverberation), active - "no" { "Time" = 7.7"PreLPF" = 44"PreDelay" = 96"HiDamp" = 27"LoGain" = -3.3"Mix" = 24} Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = -3"62 Hz" = -2"125 Hz" = -2"250 Hz" = -2"500 Hz" = -2"1 kHz" = -1"2 kHz" = 3"4 kHz" = 3"8 kHz" = 4"16 kHz" = 4"Level (dB)" = -1} Note: You will need to download and install the ToneLib-GFX software to use the preset.