VPS017-Bergantimo Celestion Preset name: VPS017-Bergantimo Celestion Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 40"Mode" = Soft} Effect: "Booster" (Dynamics / Filter), active - "yes" { "Gain" = 21} Effect: "B-Scream" (Overdrive / Distortion), active - "yes" { "Drive" = 92"Tone" = 71"Level" = 28} Effect: "RingMod" (Modulation / Sfx), active - "yes" { "Direct" = 100"Effect" = 49"Cutoff" = 3.7"Osc" = 2.0} Effect: "Splitter" (Dynamics / Filter) { "A-Bypass" = Off"A-Pan" = -25"A-Level" = 55"B-Bypass" = Off"B-Pan" = 25"B-Level" = 55"Width" = 0 'A' branch: { Effect: "Fd Twin" (Amp simulators), active - "yes" { "Gain" = 20"Bass" = 50"Middle" = 70"Treble" = 62"Presence" = 82"Master" = 50"Level (dB)" = 11} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = Bergantino NXV322 AKG D112 Balanced Celestion"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 10} Effect: "Mt-Chorus" (Modulation / Sfx), active - "yes" { "Speed" = 1.3"Depth" = 64"Time" = 2.1"Mix" = 72} } 'B' branch: { Effect: "Rndl Warchief" (Amp simulators), active - "yes" { "Gain" = 6"Bass" = 50"Middle" = 58"Treble" = 42"Presence" = 66"Master" = 34"Level (dB)" = 9} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = Bergantino NXV322 All+Room Stereo Celestion"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 7} Effect: "Chorus St" (Modulation / Sfx), active - "yes" { "Speed" = 3.5"Depth" = 72"Center" = 3.5"Mix" = 72} } } Effect: "Tremolo" (Modulation / Sfx), active - "yes" { "Speed" = 1.4"Depth" = 10"Spread" = 72"Level" = 62} Effect: "Tube Warmth" (Dynamics / Filter), active - "yes" { "Input" = 70"Warmth" = 53"Level" = 42} Effect: "Studio Rvb" (Reverberation), active - "yes" { "Time" = 7.4"PreDelay" = 32"LoDamp" = 0"HiDamp" = 12"Mix" = 46} Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = -6"62 Hz" = -5"125 Hz" = -4"250 Hz" = -4"500 Hz" = -3"1 kHz" = -1"2 kHz" = 1"4 kHz" = 1"8 kHz" = 2"16 kHz" = 2"Level (dB)" = -4} Note: You will need to download and install the ToneLib-GFX software to use the preset.
