VPS018-BL10-100x Celestion Preset name: VPS018-BL10-100x Celestion Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 40"Mode" = Soft} Effect: "Booster" (Dynamics / Filter), active - "yes" { "Gain" = 36} Effect: "Mt-Chorus" (Modulation / Sfx), active - "yes" { "Speed" = 5.3"Depth" = 28"Time" = 1.2"Mix" = 84} Effect: "Splitter" (Dynamics / Filter) { "A-Bypass" = Off"A-Pan" = -25"A-Level" = 55"B-Bypass" = Off"B-Pan" = 25"B-Level" = 55"Width" = 0 'A' branch: { Effect: "Fd Twin" (Amp simulators), active - "yes" { "Gain" = 62"Bass" = 42"Middle" = 74"Treble" = 82"Presence" = 86"Master" = 50"Level (dB)" = 11} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = BL10-100x 210 P Plectrum Basic Celestion"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 10} } 'B' branch: { Effect: "Ms JCM2000" (Amp simulators), active - "yes" { "Gain" = 6"Bass" = 50"Middle" = 62"Treble" = 34"Presence" = 31"Master" = 62"Level (dB)" = 11} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = BL10-100x 210 P MD421 Bright Celestion"Low Cut (Hz)" = 43"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 10} Effect: "RingMod" (Modulation / Sfx), active - "yes" { "Direct" = 100"Effect" = 37"Cutoff" = 2.0"Osc" = 3.2} } } Effect: "AnalogDly" (Delay), active - "yes" { "Time" = 380"Feedback" = 34"Tone" = 65"Mix" = 25} Effect: "HD Hall Rvb" (Reverberation), active - "yes" { "Time" = 7.7"PreLPF" = 44"PreDelay" = 96"HiDamp" = 27"LoGain" = -3.3"Mix" = 28} Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = 0"62 Hz" = 0"125 Hz" = 0"250 Hz" = 0"500 Hz" = 0"1 kHz" = 1"2 kHz" = 3"4 kHz" = 3"8 kHz" = 3"16 kHz" = 3"Level (dB)" = 0} Note: You will need to download and install the ToneLib-GFX software to use the preset.
