WahDelay Device: Zoom MS-70cdr Firmware: 2.00 Name on device: WahDelay Optimized for: Phones/Speaker Effects chain: Patch comments: Wahwah with stereo effect - Made by Synths and Things - https://www.youtube.com/channel/UCHCd4HqFk3j-8hXbUx2MDuQ Spoiler: Patch settings Effect: "AutoWah" (Dynamics / Filter), active - "yes" "Sense" = 5"Reso" = 8"Level" = 100 Effect: "GraphicEQ" (Dynamics / Filter), active - "yes" "160Hz" = -6"400Hz" = -3"800Hz" = 0"3.2kHz" = 0"6.4kHz" = 0"12kHz" = 0"Level" = 100 Effect: "CE-Cho5" (Modulation / Sfx), active - "yes" "E.LVL" = 100"RATE" = 15"DEPTH" = 67"LOW" = 43"HIGH" = 50"MODE" = MONO Effect: "StereoDly" (Delay / Reverb), active - "yes" "TimeL" = Quarter"TimeR" = Quarter x2"Mix" = 100"LchFB" = 55"RchFB" = 56"Level" = 100"LchLv" = 100"RchLv" = 100"Tail" = On Effect: "ModReverb" (Delay / Reverb), active - "yes" "Depth" = 100"Decay" = 20"Mix" = 23"Rate" = 18"Tone" = 5"PreD" = 30"Level" = 100"Tail" = Off Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.