Wall solo nek strat pick up Preset name: Wall solo Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 100"Mode" = Hard} Effect: "Booster" (Dynamics / Filter), active - "yes" { "Gain" = 45} Effect: "Compressor" (Dynamics / Filter), active - "yes" { "Sense" = 21"Level" = 72} Effect: "Ms JCM800" (Amp simulators), active - "yes" { "Gain" = 37"Bass" = 86"Middle" = 61"Treble" = 51"Presence" = 53"Master" = 73"Level (dB)" = 0} Effect: "Cab Sim" (Cabinets), active - "yes" { "Model" = 4x12" 1960 T75"Level (dB)" = 2} Effect: "Chorus St" (Modulation / Sfx), active - "yes" { "Speed" = 1.9"Depth" = 31"Center" = 4.4"Mix" = 40} Effect: "CrossDly" (Delay), active - "yes" { "Time" = Note sync, 1/8"Feedback" = 63"Tone" = 21"Sens" = 35"Mix" = 72} Effect: "AnalogDly" (Delay), active - "yes" { "Time" = 1"Feedback" = 68"Tone" = 32"Mix" = 45} Effect: "Chamber Rvb" (Reverberation), active - "yes" { "Time" = 5.4"PreDelay" = 42"LoDamp" = 18"HiDamp" = 13"Mix" = 39} Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = 0"62 Hz" = 0"125 Hz" = 3"250 Hz" = 0"500 Hz" = 4"1 kHz" = 0"2 kHz" = 0"4 kHz" = 0"8 kHz" = 0"16 kHz" = 0"Level (dB)" = 0} Note: You will need to download and install the ToneLib-GFX software to use the preset.