Xotic Plex Device: Zoom G5n Firmware: 3.00 Name on device: ExoticPlex Optimized for: Phones/Speaker Effects chain: Patch comments: Slightly overdriven Marahall Plexi with my take on an Xotic BB Preamp Spoiler: Patch settings Effect: "ZNR" (Dynamics), active - "yes" "Detect" = EFXIN"Depth" = 100"Threshold" = 33"Decay" = 0 Effect: "RC Boost" (Overdrive / Distortion), active - "yes" "Gain" = 61"Bass" = 44"Treble" = 75"Volume" = 48 Effect: "MS 1959" (Amp simulator), active - "yes" "Bass" = 17"Middle" = 38"Treble" = 67"Presence" = 64"Input1" = 35"Input2" = 20"Volume" = 52"SOLO" = 3 Effect: "MS4x12" (Cabinet), active - "yes" "MIC" = ON"D57: D421" = 66"Hi" = 65"Lo" = 56 Effect: "Exciter" (Filter), active - "yes" "Bass" = 0"Treble" = 42"Volume" = 65"ON/OFF" = LATCH Effect: "Air" (Reverb), active - "yes" "Size" = 21"REF" = 8"Mix" = 44"Tail" = Off Effect: "P-P Delay" (Delay), active - "yes" "Time" = 478"F.B." = 30"Mix" = 42"Tail" = Off Patch Volume: 60 DSP Load: 80% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.