Zakk Wylde Ozzy period

Zakk Wylde Ozzy period​

Preset name: Zakk Wylde

Comments:
who helps me with the settings? https://pbs.twimg.com/media/C5wefH4UYAIHmwv?format=jpg&name=small link to referation picture

Effects chain:

Spoiler: Preset settings

Effect: "Noise Gate" (Dynamics / Filter), active - "yes"
{

"Mode" = Manual
"Depth" = 50
"Threshold" = 50
"Attack" = 0
"Hold" = 5
"Decay" = 250​

}​

Effect: "Wah Pedal" (Dynamics / Filter), active - "no"
{

"Close Tone" = 3
"Open Tone" = 25
"Pedal Pos." = 40
"Style" = V848​

}​

Effect: "Vibe" (Modulation / Sfx), active - "no"
{

"Speed" = 4.8
"Depth" = 72
"Mix" = 34​

}​

Effect: "Super OD" (Overdrive / Distortion), active - "yes"
{

"Drive" = 56
"Tone" = 80
"Level" = 91​

}​

Effect: "Chorus Clsc" (Modulation / Sfx), active - "yes"
{

"Speed" = 2.3
"Depth" = 25
"Center" = 2.5
"Mode" = Stereo​

}​

Effect: "Splitter" (Dynamics / Filter)
{

"A-Bypass" = Off
"A-Pan" = -100
"A-Level" = 55
"B-Bypass" = Off
"B-Pan" = 100
"B-Level" = 55
"Width" = 100
'A' branch:
{

Effect: "Ms JCM800" (Amp simulators), active - "yes"
{

"Gain" = 70
"Bass" = 70
"Middle" = 70
"Treble" = 70
"Presence" = 70
"Master" = 70
"Level (dB)" = 0​

}
Effect: "Guitar IRs Cab" (Cabinets), active - "yes"
{

"Model" = Fender Bassman (2x15")
"Mic Position" = Edge
"Mic Distance" = Far
"Low Cut (Hz)" = 60
"Hi Cut (kHz)" = 20.0
"Mix" = 100
"Level (dB)" = 0​

}​

}
'B' branch:
{

Effect: "Ms JCM800" (Amp simulators), active - "yes"
{

"Gain" = 70
"Bass" = 70
"Middle" = 70
"Treble" = 70
"Presence" = 70
"Master" = 70
"Level (dB)" = 0​

}
Effect: "Guitar IRs Cab" (Cabinets), active - "yes"
{

"Model" = Fender Bassman (2x15")
"Mic Position" = Center
"Mic Distance" = Near
"Low Cut (Hz)" = 60
"Hi Cut (kHz)" = 20.0
"Mix" = 100
"Level (dB)" = 0​

}​

}​

}​

Effect: "Rack Comp" (Dynamics / Filter), active - "yes"
{

"Threshold (dB)" = -20
"Ratio" = 5
"Attack" = Fast
"Release (ms)" = 250
"Knee" = 25
"Level (dB)" = 0​

}​

Note: You will need to download and install the ToneLib-GFX software to use the preset.